Speeds and Feeds Calculator

Calculate CNC spindle RPM, surface cutting speed, linear feed, or chip load for milling, drilling, or turning in metric and inch units.

Result
—

How to calculate

To get RPM, divide surface speed by the cutting circumference in matching units. For milling, multiply RPM by the number of effective teeth and feed per tooth to get linear feed. For drilling or turning, use the feed per full revolution. Divide programmed feed by those same factors to recover chip load or feed per revolution.

Worked example

Use Machine units Metric · Setup Milling, feed per tooth · Cutting diameter (mm or in) 12 · Known cutting speed input Surface speed · Surface speed (m/min or ft/min) 120 · Effective teeth 4 · Known feed input Feed per tooth or revolution · Feed per tooth or revolution (mm or in) 0.05. The result is ≈ 636.6197723676 mm/min.

Input and result notes

Enter diameter and chip load in millimeters with metric units or inches with US units. Use the effective cutting diameter at the contact point and cutting data from your tool manufacturer. Machine, holder, and tool limits also determine usable settings.

Sandvik Coromant cutting speed and feed formulas

Related calculators