Scuba Weight Calculator

Estimate scuba diving ballast for an aluminum AL80 cylinder in salt water, or adjust a verified lead weight setup for a change in water density.

Result
—

How to calculate

For salt water with an AL80, the PADI starting percentages are 5% of body weight for a 3 mm wetsuit, 10% for a full 5 to 7 mm wetsuit, and 15% as a starting point for a drysuit. Add 2 kg for cylinder buoyancy near the end of the dive. To transfer an unchanged setup, divide the complete mass from a neutral buoyancy check by the original water density to estimate displacement. Apply the density difference and account for the water displaced by any lead added or removed.

Worked example

Use What to estimate Starting ballast for salt water and an aluminum AL80 · Mass unit Kilograms · Body weight 80 · Exposure suit Full 5 to 7 mm wetsuit. The result is ≈ 10 kg.

Input and result notes

These are starting estimates. Gear, suit compression, body composition and cylinder pressure affect actual buoyancy. In transfer mode use the complete mass including verified lead ballast and a cylinder at the same reserve pressure as your check. All else must match, including suit and undergarments. Verify weighting in controlled water with a buddy using your actual kit before relying on the estimate.

PADI starting point for AL80 in salt water

Divers Alert Network on weighting and buoyancy checks

NIST density of lead

Related calculators